5 Common household plumbing problems

5 Common household plumbing problems

5 Common Household Plumbing Problems You Should Know

Plumbing problems are a common issue that homeowners face, and they can often be a source of frustration and inconvenience. In this blog post, we'll discuss five of the most common household plumbing problems and what you can do to fix them.

Leaking faucets: A leaking faucet is a common problem that can waste a significant amount of water over time. The cause of the leak can be a worn-out washer, corroded valve seat, or loose parts. To fix the leak, replace the washer or valve seat or tighten any loose parts

Clogged drains: Clogged drains can cause water to back up and overflow, leading to water damage and unpleasant odours. The most common causes of blocked drains are food particles, hair, and soap scum. To fix the problem, you can try any of these
DIY solutions: Boiling Water: Start by pouring boiling water down the drain. The boiling water can help dissolve grease or other substances causing the clog. Be cautious when using boiling water, especially with plastic pipes.

Baking Soda and Vinegar: Sprinkle half a cup of baking soda down the drain, followed by half a cup of vinegar. The mixture will create a foaming reaction to help break down the clog. Let it sit briefly, then flush the drain with hot water.

Salt and Hot Water: Mix equal parts of salt and hot water and pour it down the drain. Leave it for a few minutes, then flush the drain with hot water. Salt can help dissolve grease and other debris.

Baking Soda and Salt: Mix half a cup of baking soda with half a cup of salt and pour it down the drain. Let it sit for several hours or overnight, then flush it with hot water. This method is handy for stubborn clogs.

Plunger: If the clog persists, try using a plunger. Ensure enough water is in the sink or tub to cover the plunger's cup. Create a tight seal around the drain and plunge vigorously for several seconds. Repeat as necessary.

Mechanical Snake or Auger: You can use a plumbing snake or auger for more stubborn clogs. Insert the tool into the drain and rotate it to break up the clog. Follow the manufacturer's instructions for proper usage.

Running toilets: A running toilet can waste significant water, leading to high water bills. The most common cause of a running toilet is a faulty flapper valve. To fix the problem, you can replace the flapper valve or adjust the water level in the tank. It is important to note that toilets have different flapper valves.

Low water pressure: Low water pressure can be caused by various factors, including clogged pipes, faulty fixtures, and mineral buildup. To fix the problem, clean any clogged pipes or fixtures or install a water pressure booster pump.

Geyser problems: Geysers are essential for providing hot water for your household needs but can also develop problems over time. Common water heater problems include a faulty thermostat, a leaky tank, or sediment buildup. To fix the problem, replace the defective parts or the entire water heater.

In conclusion, these are the five most common household plumbing problems homeowners face. While some problems can be fixed with simple DIY solutions, others may require professional assistance. If you need help fixing a plumbing problem, it's always best to seek the help of a professional plumber. By being aware of these common plumbing problems, you can take steps to prevent them from occurring and ensure that your plumbing system runs smoothly.